KEBO AG

KEBO AG

We specialise in injection moulds to meet demanding customer requirements. We offer very short cycle times, even with a high number of cavities.

Our development team looks back on 40 years of experience and works with the latest technologies. Through close contact with the major industry players, we engage in international knowledge transfer.


Plastics-Innovation

YOUR PRODUCTION GOALS DRIVE OUR INNOVATION

In-house developments in injection moulding technology are part of our unique offering. With solutions for a wide range of requirements, we meet the need for high component quality, uninterrupted production steps and high reliability across the entire life cycle of the products.

In order to test performance prior to the build of a production mould – especially in the construction of complex shapes – we use in-house pilot moulds in the design phase. This enables us to carry out practical tests with our full hot runner systems so we can gain a realistic picture of the project feasibility and prevent any surprises during later stages.


Injection-Moulds

Drawing on our extensive experience, we can design the right injection mould for every imaginable application. However, there has been a natural process of specialisation in our corporate and technological development. We have gained high-quality expertise in the following fields:

  • MEDICAL
  • PHARMA/LABORATORY
  • THINWALL/IML

 

Technical Competence

THE MULTI-DIMENSIONAL THINKING OF OUR DEVELOPMENT AND ENGINEERING DEPARTMENT
Our engineering department has been working on injection moulding technology for 40 years. During the development in this demanding sector, it solved challenges large and small, in very different situations and environments. It is against this background that the solid expertise within our company was developed.

At the same time, we have built up a comprehensive network of major plastic producers, injection moulding machine manufacturers and automation technology specialists. This means that we have access to the latest technologies and achievements in the field.
 

 

EVENTS

1. Chinaplas 2020
April 21 - 24, 2020
National Exhibition and Convention Center,
Hongqiao, Shanghai, - China
KEBO AG in the Swiss Pavilion

2.Plastpol 2020
May 19 - 22, 2020
Kielce - Poland
KEBO AG with own booth

3. FAKUMA 2020
October 13 - 17, 2020
Friedrichshafen - Germany
KEBO AG with own booth





Contact Information

  • KEBO AG
    Rundbuckstrasse 12
    Neuhausen, Schaffhausen 8212
    Switzerland
  • Map
  • Phone: +41 (0)52 674 14 14
  • Fax: +41 (0)52 674 14 00
  • Send Message vCard Print Email Friend Add to Favorites Share Tweet +1 Share Add Review Download PDF Make a Suggestion Report Listing Edit Listing
  • Hours

    Monday 08:00 - 17:00
    Tuesday 08:00 - 17:00
    Wednesday 08:00 - 17:00
    Thursday 08:00 - 17:00
    Friday 08:00 - 17:00

Functions Menu

Keywords

KEBO AG, Injection molding, Injection, Injection Mold Technology, Neuhausen, High performance injection molds, Injection molds, KEBO MED, KEBO PACK, KEBO CAP, Infusion parts, Transfusion parts, Caps, Parts for safety syringes, Parts for disposable syringes, Parts for insulin syringes, Connectors, Filter, Petri dishes, Inhalers, Reaction vessels, Analysis vessels, Labware, Parts for pump body, Spray heads, Piston, Food packaging for ice cream, Food packaging for dairy products, Food packaging with first-opening guarantee band, Food packaging without first opening guarantee band, Drinking glasses, Cups, Round IML packaging, Angular IML packaging, Cover, Cutlery, Screw caps for still drinks, Screw caps for carbonated drinks, Turn-locks for silent drinks, Hinged closures, Pourer, Kebo tools, Production of medical products closures, Production of medical products packaging, Production of laboratory products closures, Production of laboratory products packaging, Production of pharmaceutical products closures, Production of pharmaceutical products packaging, IML, Infusion and transfusion parts, Protective caps, Parts for disposable and safety syringes, Insulin pens, Valves, Blood dialysis parts, Hepa filters, Test tubes, Reaction boards, Multiple analysis trays, Pump bodies, Pistons, Food packaging articles for yellow fat, Food packaging articles for dairy products, Food packaging with tamper-evidence seal, Food packaging without tamper-evidence seal, Round IML packaging items, Square IML packaging items, Container with handle, Lids, Screw closure for still beverages, Twist-off closure for still beverages, Screw closure for carbonized beverages, Twist-off closure for carbonized beverages, Spouts, ,

Mehr...

Reciprocal Linking

Link your Company Profile by copying the code and embedding there where the signet should be displayed.

Visit this company on theirr company profile in the B2B company search engine Bailaho. The company search engine for Germany, Austria and Switzerland!

Copy to Clipboard

Other Information

KEBO AG

Recent Listings
  • KEBO AG
    Rundbuckstrasse 12
    Neuhausen, Schaffhausen 8212
    Switzerland

    Plastic injection moulds with large numbers of cavities for highest outputs of products for the medical, pharmaceutical, laboratory and cosmetics industries, for closures, packaging articles, IML, etc.
  • HBS Bolzenschweiss-Systeme GmbH & Co. KG
    Felix-Wankel-Straße 18
    Dachau, Bavaria 85221
    Germany

    HBS is a global leader in the innovation, development, production and marketing of quality products for the stud welding industry.
  • DBS GmbH Automatisierungstechnik
    Lachenstraße 3
    Adelsheim, Baden-Württemberg 74740
    Germany

    Die DBS GmbH im badischen Adelsheim bietet die komplette Palette in der Automatisierungstechnik. Besuchen Sie unsere Website oder nehmen Sie mit uns Kontakt auf.Wir freuen uns auf Ihre Anfrage!
  • KLINGER A.W. Schultze GmbH
    Mercatorstraße 10
    Geesthacht, Schleswig-Holstein 21502
    Germany

    Our company focusses on sealing technology with special orientation on flat gaskets made of materials, such as KlingerSil® and Sigraflex®.
  • DrM, Dr. Mueller AG
    Alte Landstrasse 415
    Maennedorf, Zurich 8708
    Switzerland

    SOLID-LIQUID SEPARATION SYSTEMS FUNDABAC® | CONTIBAC® | STERIBAC®
  • DIAMETAL GROUP
    Solothurnstrasse 136
    Biel/Bienne, Bern 2504
    Switzerland

    “Success with precision” – the Swiss-based company Diametal has been operating under this motto for over 75 years.
  • Arno Arnold GmbH
    Bieberer Straße 161
    Obertshausen, Hesse 63179
    Germany

    Our innovative protective cover systems for machine tool centers stand for creativity and competence.
Popular Listings
  • M. Opitz & Co AG
    Haggenstr. 40
    St. Gallen, St Gallen 9014
    Switzerland

    Chemical Industry Manufacturers, Chemical-Pharmaceutical Products Wholesale, Cosmetics & Toiletries
  • Aalberts Surface Treatment GmbH
    Boelckestraße 25-57
    Kerpen, Northrhine-Westphalia 50171
    Germany

    Development, production and refinement of functional and highly durable surface designs of metallic materials.
  • MINKA Holz- u. Metallverarbeitungs-Ges.mbH
    Flurgasse 6
    St. Lorenzen im M, Styria 8642
    Austria

    Iron and Metal Crafts, Timber Construction and Timber Finishing Manufacturers, Components and Equipm
  • HK Hydraulik-Kontor GmbH
    Gerlingweg 86
    Elmshorn, Schleswig-Holstein 25335
    Germany

    Your partner for hydraulic drive technology, mobile-and industry-hydraulic
  • Gebr. M?ller AG Baugesch?ft
    Dorfstrasse
    Reichenbach im Kandertal, Bern 3713
    Switzerland

    Construction and special construction companies, building construction companies, civil engineering
  • Arnold Kamber AG
    Schluchtweg 18
    H, Solothurn 4614
    Switzerland

    Construction and special construction companies, building construction companies, civil engineering
  • Metallverarbeitung Horst Eiper Ges.mbH
    Oberboden 2
    Himmelberg, Carinthia 9562
    Austria

    Iron and metal production and processing, art forging, metal construction, metalworking, forging
-->